Wholesale Sweatpants From 100 Units

Joggers And Cuffed Fits

Joggers taper from knee to ankle and use elastic cuffs, making them the most dependable unisex core shape for athleisure, travel, and logo-set programs. Specify finished inseam, cuff opening, and rise early; rib recovery must match the garment’s intended wash life. Cuffed straight fits keep a roomier thigh while controlling the hem, which suits extended-size and modern oversized ranges. Pair them with matching hoodies or crewnecks for replenishable fleece sets.

Open-Hem And Straight Leg

Open-hem straight-leg sweatpants fall cleanly over sneakers and appeal to customers wanting less athletic styling. A 20–24 cm hem opening is a useful starting point, but grade it with the leg rather than copying one opening across all sizes. Straight-leg styles suit core programs when the block is neutral, while seam slits or adjustable drawcord hems give a fashion-drop version. Confirm hem length against the buyer’s footwear styling before bulk approval.

Wide-Leg And Flared Shapes

Wide-leg and flared sweatpants create the strongest fashion silhouette, with volume concentrated from hip to hem or released below the knee. They suit women’s, streetwear, and lounge-focused drops more than basic replenishment. Two fit samples are often worthwhile: one checks the rise and hip balance, while a second checks sweep and break length. Heavier fleece can hold a wide leg; French terry gives a softer drape.

Cargo And Fleece Shorts

Cargo sweatpants add utility pockets and workwear styling, but pocket placement, bartacks, and bulkier seam intersections require tighter in-line inspection. Use them for branded capsules rather than simple core stock. Fleece shorts and knee-length sweatshorts share the same waistband block as many matching sweatpants sets. They are practical warm-weather companions for hoodie-and-bottom programs and reduce development work when trims are shared.

Core Fabric Structures

280–320 GSM French terry has an unbrushed loopback interior, breathable hand feel, and moderate warmth; it is the safest all-season choice for elevated joggers. 300–360 GSM cotton fleece uses a brushed inner face for softness and insulation. It sells well for autumn and winter, but should be pre-shrunk and tested for surface pilling after repeated washes.

• French terry: breathable premium basics
• Loopback terry: lighter, cleaner interior
• Brushed fleece: warm lounge and winterwear

Blend And Recycled Options

80/20 cotton-poly fleece commonly balances a cotton-rich hand with better shape retention, faster drying, and lower cost than 100% cotton. Ring-spun cotton gives a smoother face than open-end yarn. 50/50 recycled-poly blends support performance-led and value programs, though recycled-content documentation should be requested by lot. Higher polyester ratios can reduce breathability and create a more synthetic hand.

• 80/20 cotton-poly: dependable core program
• 100% cotton: natural hand, higher shrinkage risk
• Recycled blends: utility and sustainability positioning

Weight, Care, And Positioning

240–280 GSM loopback terry works for spring, travel, and layering; 420–500 GSM heavyweight fleece supports premium streetwear and cold-climate drops. Heavier fabric improves structure but raises freight, drying time, and unit cost. 3–5% dimensional shrinkage after washing is a common development tolerance to review before bulk approval. Specify wash temperature, tumble-dry guidance, anti-pilling finish, and a finished-garment wash test in the tech pack.

• Lightweight: warm-weather and athleisure
• Midweight: year-round wholesale programs
• Heavyweight: premium, structured winter product

Fit, Color, And Wash

XS–3XL programs need graded patterns rather than enlarged base sizes; confirm rise, inseam, thigh, cuff opening, and waistband stretch on a size set. Pantone-dyed fleece, garment dye, acid wash, enzyme wash, and brushing change shade and hand feel. Approve a lab dip or wash panel before bulk cutting.

• Choose elastic width and recovery target
• Specify flat, round, or tipped drawcords
• Select rib cuffs, open hems, or elastic hems
• Define slant, welt, cargo, or back pockets

Branding And Decoration

8–12 cm left-thigh embroidery suits compact logos, while large screen prints work best on smooth front or side-leg panels. Puff print creates height but loses fine lines and requires controlled curing. Appliqué, chenille patches, woven labels, hangtags, and branded bags add identity; each needs artwork, placement, and color approval before production.

• Embroidery: durable; simplify tiny lettering
• Screen print: scalable; separate spot colors
• Puff print: tactile; avoid intricate artwork
• Patches and appliqué: dimensional; secure edges

Bulk Approval Checklist

1 approved pre-production sample should match the final fabric, color, trims, decoration, measurements, and packaging. Record tolerances and artwork scale on the signed approval sheet. 100-unit minimums can support focused OEM launches, but placement changes after approval may require new screens, patches, or samples.

• Graded measurement chart and fit comments
• Pantone standard, lab dip, or wash panel
• Decoration strike-off and placement template
• Label copy, hangtag, carton, and polybag approval

Fabric And Seam Checks

280–360 GSM fleece or French terry should remain consistent across panels; compare cut swatches from the roll for weight and shade variation. 10–12 stitches per inch is a practical benchmark for durable overlock seams, with coverstitch or flatlock used where stretch and comfort matter.

• Check seam allowance is fully caught in overlock.
• Pull-test crotch, inseam, and pocket openings.
• Wash one sample before approving bulk.

Fit And Recovery

2–3 wash cycles expose imbalance in rise, inseam, and cuff recovery before production. Measure front rise, back rise, inseam, thigh, leg opening, and waistband against the approved spec. 85–95% elastic recovery is a useful target after repeated extension; weak elastic produces a baggy waist or stretched cuffs. Grade each size deliberately rather than scaling a single base pattern.

• Test waistband stretch and recovery after 10 pulls.
• Confirm drawcord ends are bartacked or securely anchored.
• Compare graded samples from XS through 3XL.

Reinforcement And Final Inspection

2 bartacks at pocket stress points reduce tearing during wear, while double-needle hems and resilient rib cuffs resist abrasion. Inspect pocket bags for consistent depth and clean seam finishing. 3% or less dimensional shrinkage after the agreed wash test should be recorded in the approved sample. Final inspection should verify measurements, stains, skipped stitches, decoration placement, labels, and packed quantities.

• Check cuff rib returns to shape after stretching.
• Verify pocket bartacks and drawcord anchoring.
• Use an approved measurement tolerance sheet.

Match Production Expertise

Request 3–5 relevant reference styles showing joggers, open-hem pants, fleece sets, or garment-dyed programs. Confirm the factory can handle cut-and-sew, rib attachments, elasticated waists, drawcord channels, and size grading from XS through 3XL.

Validate Development And Materials

Ask for a tech-pack review, pattern timeline, prototype cost, and size-set process before paying a deposit. Request fabric swatches with composition, GSM, shrinkage, pilling, colorfastness, and available color information; French terry and brushed fleece behave differently after washing.

Check Controls And Communication

Request current compliance documents relevant to your market, such as OEKO-TEX, GOTS, WRAP, or BSCI where applicable. Ask who approves Pantone lab dips, measurements, in-line inspections, decoration placement, and final AQL checks, and how defects are reported.

• Named sampling contact and response window
• Measurement tolerance and inspection report
• Incoming-fabric and final-packing checks

Confirm Commercial Readiness

Compare quoted MOQ by style, color, and fabric, plus sample lead time, bulk lead time, payment schedule, Incoterms, and freight support. Junsheen can scale from 100 units per style and color to bulk programs; buyers should still request a line-item quote and export references before commitment.

Price-Only Supplier Selection

Three quotes that look similar can conceal different fleece weight, pocket construction, shrinkage allowance, and inspection scope. Compare an identical tech pack, Incoterm, sample charge, and defect remedy—not unit price alone. 10% cheaper fabric can cost more after pilling, twisting, or returns. Request a costed bill of materials and retain a contingency of 5–10% for revisions, testing, and logistics.

Sampling And Specification Gaps

One approved pre-production sample is the production reference; skipping it leaves fit, drawcord length, and wash appearance open to interpretation. Approve measurements, Pantone color, decoration placement, and workmanship in writing before cutting. Six core fields—fabric composition, GSM, tolerances, construction, artwork, and packaging—should be explicit in the tech pack. Send graded measurements from XS through 3XL when extended sizing is planned, rather than scaling one base size blindly.

Material, Artwork, And Delivery

280–360 GSM fleece may suit a premium winter jogger, but hand feel and performance require testing. Confirm shrinkage, colorfastness, pilling, and stretch recovery on the actual dyed bulk fabric before approval. 2–3 colorways can trigger separate fabric-dye, trim, or color minimums even when the style MOQ is met. Freeze print-ready artwork early, then book freight with a time buffer for production, inspection, customs, and a replacement sample.

Set The Product Brief

Three decisions define the brief: customer fit, price architecture, and channel. Work backward from retail price to an ex-factory target, freight allowance, duty exposure, and wholesale margin. Two core styles are usually enough for a first drop: a cuffed jogger and an open-hem fit. Specify 320–450 GSM French terry or brushed fleece, fabric composition, Pantone colors, and intended wash.

Build And Test Samples

One tech pack should list graded measurements, rise, inseam, leg opening, pocket construction, stitch details, artwork placement, labels, and packaging. A sketch or reference garment is useful, but measurable specifications prevent interpretation gaps. Two approval gates reduce expensive bulk changes: swatches first, then a fit sample. Revise balance, waistband recovery, shrinkage, and logo scale before approving a size set or pre-production sample.

Confirm Bulk Readiness

Three trim approvals should be documented before the purchase order: drawcord, eyelets, and private-label components. Confirm decoration method—such as screen print, embroidery, or silicone—against the approved fabric and wash test. 100 units per style and color can support a capsule program at Junsheen; lock quantities, approved sample, payment schedule, and delivery terms in writing. Keep signed measurement tolerances and packing instructions with the order.

Plan Delivery And Launch

Two inspection stages matter most: in-line checks before defects repeat and final packed-goods inspection before shipment. Review measurements, seam quality, decoration, shade consistency, labels, carton counts, and AQL requirements. Four retail assets should be ready before goods depart: product photography, flat measurements, fabric-care copy, and SKU data. Reserve time for freight booking, customs documents, warehouse receiving, and a final inventory count.

• Approve samples before bulk material commitment
• Book freight after final carton data
• Publish care guidance matched to fabric testing