Cheap Custom Hoodies, Starting at 100 Units

Pullover And Zip-Up

Pullover hoodies suit logo-led streetwear because the uninterrupted front offers the largest print area and avoids zipper cost. Zip-ups serve layering customers, but zipper length, tape quality, and installation add cost and can interrupt chest artwork.

Oversized And Cropped

Oversized fits target contemporary and unisex programs, requiring deliberate shoulder, sleeve, and body grading rather than simply enlarging a standard block. Cropped hoodies appeal to womenswear and youth assortments, but shorter yields can be offset by specialized pattern development and fit approvals.

Heavyweight And Lightweight

320–450 GSM heavyweight hoodies support premium hand feel, embroidery, and structured oversized silhouettes, while consuming more fabric and increasing freight weight. Lightweight 240–300 GSM options suit warm climates, layering, and lower landed-cost programs, though they provide less concealment for bulky seams or dense prints.

Fleece-Lined Styles

Brushed fleece-lined hoodies are practical for cold-weather retail and create a soft interior customers recognize immediately. Brushing, anti-pilling control, thicker cuffs, and wash testing can raise cost, so confirm shrinkage and pilling expectations before bulk approval.

Sample Brief Priorities

A complete sample brief should state silhouette, intended wearer, finished garment measurements, GSM target, color count, and decoration placement. Junsheen can develop patterns and graded size sets from XS through 3XL, including extended-size and oversized proportion adjustments.

Budget Versus Premium Handfeel

280–320 GSM open-end cotton/poly fleece is a cost-focused baseline for promotional and entry-price drops. Polyester improves shape retention and reduces shrinkage, but a high polyester share can feel less natural. 320–380 GSM ring-spun cotton-rich fleece feels denser, smoother, and more premium. It supports cleaner screen-print edges and better retail positioning, although cotton requires controlled wash testing.

Construction Sets Seasonal Use

240–300 GSM French terry has unbrushed loops on the reverse, giving breathable midweight comfort for spring, layering, and mild climates. Loopback construction also provides a stable surface for screen printing and embroidery. 300–380 GSM brushed fleece traps more air and delivers greater warmth for autumn and winter. Brushing increases softness but can raise pilling risk if yarn quality and finishing are weak.

Specify Recycled Fibers Carefully

20–50% recycled polyester can support a lower-impact material story while retaining durability and faster drying. Request fiber-content documentation and test samples, because recycled blends can vary in hand feel and shade consistency. 100% cotton, organic cotton, or combed cotton blends suit brands prioritizing a natural touch. Pre-shrinking, enzyme washing, and anti-pilling finishing should be confirmed before bulk approval.

Color And Fit Control

Pantone TCX or TPX references are safer than screen colors; submit a physical swatch or approved lab dip for critical shades. XS–3XL grading should be reviewed as a size set, especially for oversized shoulders, sleeve length, and body balance.

Pockets, Cords, And Ribs

One-piece stock kangaroo pockets, stock drawcords, and available rib colors keep development cost and lead time down. Custom pocket proportions, metal-ended cords, contrast ribbing, or matched-dye components are worthwhile when they define the collection silhouette.

Labels And Pack Presentation

Three label layers—main, size, and wash-care—make a blank hoodie retail-ready without changing its base pattern. Add hangtags, polybags, barcode stickers, or custom cartons only where the retail channel justifies the added unit cost.

Artwork And Sample Signoff

AI, EPS, or vector PDF artwork prevents soft edges and inaccurate logo scaling; include placement dimensions in centimeters. One pre-production sample should confirm color, measurements, trim choices, label copy, and packaging before the factory releases bulk materials.

Method Cost And Capability

Eight common methods trade setup expense against unit cost, color freedom, and surface feel. Confirm the planned print size and placement before approving artwork, because oversized chest or full-back coverage raises both consumption and labor.

Artwork And Quantity Fit

100-unit programs usually favor screen print for simple repeated art, DTF or heat transfers for variable small runs, and DTG for detailed multicolor graphics. Screen-print screens create setup charges per color; DTF and DTG reduce color setup but typically carry a higher per-piece cost. 3D embroidery, appliqué, and puff ink add dimension, but dense stitching or large ink deposits can stiffen fleece. Reserve those techniques for smaller chest marks, sleeve logos, or back details rather than broad panels.

Durability And Placement

30–40 cm back prints need adequate curing and a stable fleece surface to resist cracking; request wash testing on the approved sample. Embroidery and woven patches are durable, yet backing, stitch density, and patch edges must not irritate the wearer. 1–4 color screen prints suit bold logos, while DTG supports photographic gradients on high-cotton garments. State Pantone references, placement from seams, maximum dimensions, and tolerance in the tech pack.

Seams And Stress Points

8–10 stitches per inch is a practical starting specification for medium-weight fleece seams; lighter fabrics may need more density to prevent seam grin. Require coverstitching or twin-needle reinforcement at hems and cuffs, plus bartacks at pocket corners.

• Inspect shoulder, armhole, pocket, and hood seams after stretching.
• Check thread tension for skipped stitches and puckering.
• Specify seam allowance and stitch type in the tech pack.

Rib, Hood, And Drawcord

2×1 rib cuffs and waistbands should recover after repeated extension without permanent waviness. Measure relaxed and stretched rib openings on the approval sample, then confirm the hood sits evenly and the center seam is not twisted. 5–6 mm drawcords need clean-cut, securely attached tips and matching eyelets. Confirm drawcord length, exit-point spacing, and hood opening shape against the approved pattern.

Pocket And Measurement Control

6–10 mm pocket-placement tolerance is typical for a centered kangaroo pocket; verify both corners against the center-front line. Set garment measurement tolerances by point of measure, commonly ±1 cm for key body dimensions and tighter where branding depends on alignment. 100% cotton fleece can shrink materially unless stabilized. Record pre- and post-wash measurements, then approve the graded size set before bulk cutting.

Wash And Color Approval

3–4 grade colorfastness targets are commonly requested for washing and rubbing, depending on fabric, dye method, and market requirements. Test the actual bulk fabric or a representative lab dip, not only a supplier color card. 2 wash cycles on the finished sample can reveal twisting, bleeding, pilling, print cracking, and rib distortion. Junsheen can retain approved patterns, graded size sets, and material records to keep repeat orders consistent.

Verify Hoodie Experience

3 comparable hoodie references reveal more than a generic factory catalog: request photos, measurement charts, and wash-test results for fleece or French terry programs. 2 questions matter early: Which weights, fits, and decoration methods are routine, and who owns pattern making, grading, and production follow-up?

Test Development And Sourcing

1 pre-production sample should confirm fabric hand, Pantone color, shrinkage, measurements, print placement, and label construction before bulk approval. 280–400 GSM fleece and 300–360 GSM French terry can look similar in a quotation but perform differently. Request fabric composition, GSM tolerance, test reports, swatches, and approved trim specifications.

Audit Control And Delivery

4 checkpoints—incoming fabric, in-line sewing, measurement, and final packing—should be documented with an inspection standard and defect-handling process. 2 export documents to request are a recent shipment example and packing-list format. Ask about destination experience, carton limits, lead time, monthly capacity, certifications such as OEKO-TEX, GOTS, WRAP, or BSCI where applicable, and payment milestones.

Compare Quotations Like For Like

1 lowest unit price often excludes sampling, labels, freight, duty treatment, or a higher decoration setup charge. Send every supplier one tech pack and one requested quantity/color breakdown. 3 commercial checks prevent surprises: quote validity, tolerance policy, and balance due date. Compare landed cost, approved sample quality, communication speed, and repeat-order consistency—not only the ex-factory figure.

Specify Fabric Completely

280 GSM French terry and 280 GSM brushed fleece do not wear, shrink, or print the same. Name composition, GSM tolerance, finish, color standard, and acceptable shrinkage; otherwise the factory may price a lower-cost substitute.

• Request a swatch and wash-tested sample
• State cotton/polyester ratio and fabric construction
• Approve Pantone or physical color standard

Compare Like-For-Like Quotes

A low unit price can exclude labels, print screens, packaging, sampling, or export documents. Compare an itemized quote and Incoterm, then calculate landed cost including freight, insurance, duties, and destination handling.

• Garment, decoration, labels, packaging
• Sample and setup charges
• Freight, duties, and local delivery

Test Before Bulk Approval

3–5% wash shrinkage can shift a fitted hoodie out of tolerance, while untested ink can crack or bleed after laundering. Wash-test decorated samples, verify measurements after relaxation, and approve a signed pre-production sample.

• Measure before and after washing
• Check print adhesion, colorfastness, and hand feel
• Record approved tolerances by size

Protect Fit And Presentation

XS–3XL grading cannot be assumed from one base size; poor shoulder, sleeve, and body increments create returns. Review a full size set, select decoration suited to the fabric, and specify folding, polybags, barcode placement, hang tags, and carton marks before bulk.

• Use embroidery for durable small logos
• Avoid heavy prints on lightweight fleece
• Confirm carton quantity and shipping marks