Bulk Sweatshirts OEM From 100 Units

Crewnecks And Pullover Hoodies

A 300–360 GSM crewneck suits clean retail basics, teamwear, and layered streetwear; its uninterrupted front and back give screen printing, embroidery, and applique broad placement options. A pullover hoodie adds a hood, kangaroo pocket, drawcord, and rib set, making it stronger for casual and collegiate capsules. Measure hood opening, pocket symmetry, and drawcord length on the sample before grading.

Zip Hoodies And Oversized Fits

A full-zip hoodie works for travel, athleisure, and merch because customers can regulate warmth; split-front artwork must align across the zipper. Specify zipper gauge, puller finish, tape color, and whether a backing tape protects the print. A 5–10 cm dropped shoulder oversized fit targets contemporary unisex and streetwear customers. Its larger panels favor back graphics, but sleeve length and body width need separate fit approval rather than simply enlarging a regular pattern.

Cropped, Fitted, Youth And Extended Sizes

A cropped or fitted sweatshirt serves fashion-led, womenswear, and layering assortments, where a shorter body or shaped side seam defines the proposition. Confirm hem recovery and bust-to-waist balance after wash testing. Sizes XS–3XL need graded shoulders, sleeves, body proportions, and mobility—not scaled copies of one base size. Youth styles also require age-appropriate drawcord decisions and a dedicated measurement chart.

Fiber And Knit Choices

100% ring-spun cotton gives a soft, breathable face and strong water-based or discharge-print results, but it needs controlled compaction to manage shrinkage. Open-end cotton is more economical and drier-hand, suited to promotional programs. French terry has unbrushed loops inside for breathable midweight layers; fleece is brushed for insulation. Brushed fleece feels plushest, while a cotton-poly blend improves recovery, color retention, and pilling resistance when properly specified.

Weight, Climate, And Positioning

280–340 GSM suits spring, indoor retail, and lighter premium basics; 350–420 GSM supports mainstream autumn and winter programs. At 430–500 GSM, oversized silhouettes gain structure and warmth, but buyers should validate drying time and shipping cost. Recycled cotton and recycled polyester can support lower-impact briefs, but blend percentage, certification scope, and color-lot consistency must be documented before approval. Request swatches and a washed sample for every new fabric.

Sampling Specifications

3 wash cycles at the intended care temperature reveal practical shrinkage, spirality, and surface change before bulk approval. Specify finished GSM tolerance, composition, brushing level, color standard, and acceptable pilling grade in the tech pack.

• Use compacted cotton for improved dimensional stability.
• Match print ink to fleece or terry surface texture.
• Test dark colors for crocking and wash fastness.

Build The Private Label

Three core identifiers—neck label, care label, and hangtag—should carry consistent fiber, origin, and size information. Add folded polybags, stickers, or custom mailers only when the retail channel supports the added cost. XS–3XL grading needs more than proportional enlargement: shoulder width, body length, sleeve balance, and rib openings require review. Junsheen can develop patterns and graded size sets from a tech pack, sketch, or reference garment.

• Pantone-approved shell and rib colors
• Woven main, size, and care labels
• Hangtags, barcode stickers, and branded packaging

Match Decoration To Volume

One-color screen printing usually offers the strongest unit economics for repeat graphics, while embroidery adds texture and perceived value. Approve strike-offs for thread colors, ink opacity, and placement before production.

Protect The Artwork

2–3 decoration placements are normally easier to control than an all-over layout. Specify maximum print dimensions, artwork files, wash testing, and allowable placement tolerance in the tech pack. One sample cannot validate every size; request at least a base-size approval and placement review across the graded range. Dense embroidery, large patches, and heavy appliqué may need stabilizers or backing that affects hand feel.

Fabric And Rib Stability

280–360 GSM fleece or French terry should be tested after laundering; weight, spirality, pilling, and shrinkage must remain within the approved tolerance. 2×1 or 2×2 cotton-elastane rib needs a specified recovery standard at cuffs, hem, and neck. Request before-and-after wash measurements and a retained fabric swatch.

• Record garment length and chest shrinkage
• Check rib rebound after repeated stretching
• Verify colorfastness to washing and rubbing

Seams And Reinforcement

8–10 stitches per inch is a practical baseline for many sweatshirt seams, while high-stress areas need consistent seam allowance and no skipped stitches. 1/4-inch neck tape, shoulder-to-shoulder reinforcement, and secure bartacks at pocket corners reduce distortion. Inspect inside seams as carefully as the exterior.

• Confirm shoulder tape is continuous
• Check flat, even overlock seams
• Pull-test pocket and side-seam joins

Hoods, Hardware And Finish

3-panel hoods generally shape more cleanly than basic 2-panel hoods, but the approved sample must confirm opening, depth, and drawcord exit symmetry. 5 gauge or specified metal/plastic zippers should run smoothly without wave or snagging. Measure kangaroo-pocket alignment from center front and inspect finished garments after wash.

• Match drawcord length and tip treatment
• Test zipper travel and tape stability
• Approve softening or anti-pilling finish

Verify Category Capability

3 comparable samples reveal more than a broad product catalog: inspect rib recovery, neckline shape, seam consistency, print registration, and wash results. 100-unit starting quantities can suit capsule launches, but confirm whether MOQ applies per style, color, fabric, and size ratio.

• Request recent fleece and French terry samples
• Confirm decoration is performed or controlled in-house
• Review approved measurement tolerances

Test Development Discipline

1 approved tech pack should produce a sample, size set, and pre-production sample with documented changes. Ask who owns patterns, how revisions are logged, and what approval gates stop bulk cutting. XS–3XL programs need deliberate grading; shoulder balance, sleeve length, body proportion, and mobility should be checked across the set.

• Pantone and trim approvals
• Fabric composition and GSM records
• Wash-test and shrinkage results

Audit Production Controls

80,000+ monthly units is useful only when capacity is scheduled by line, fabric arrival, decoration, and packing date. Request a critical-path timeline covering sample approval through final inspection. A repeatable program uses incoming-fabric, in-line, measurement, decoration, and final packed-goods checks. Ask for AQL practice, compliance certificates relevant to your market, and corrective-action records.

• Named production contact and response times
• Export documents and shipping options
• Retained patterns, graded sets, and material records

Price Is Not Landed Cost

A $1 lower factory quote can disappear through excess freight, import duty, rework, or rejected goods. Compare like-for-like quotes: fabric composition, GSM, decoration, labels, packaging, Incoterm, and inspection scope. A 100-unit launch should carry a freight-and-duty estimate before retail pricing is set. Ask for carton dimensions, gross weight, shipping method, and a destination-specific customs estimate.

Specifications Need Proof

One approved pre-production sample is the practical control point before cutting bulk fabric. Do not approve from photos alone; measure key points, inspect stitching and print placement, then sign dated comments. A tech pack should state tolerances, not only finished measurements. Include shrinkage testing after the intended wash, graded measurements from XS through 3XL where applicable, construction details, and trim callouts.

Control Materials And Timing

280–320 GSM French terry and 320–400 GSM brushed fleece suit different climates and silhouettes; choosing by weight alone can produce the wrong hand feel or drape. Request swatches and wash-tested samples before confirming fabric. Pantone references, lab dips, and a defined lighting standard prevent color approval by screen image. Limit decoration to techniques compatible with the fabric, allow sampling and production lead time, and avoid booking launches before freight and customs buffers are confirmed.

Position The First Capsule

3–5 SKUs usually give a new label enough merchandise depth without multiplying development costs. Choose one core fit, one statement style and two proven colors; reserve seasonal colors for later reorders. 60–70% of opening units should sit in evergreen styles that can replenish. Set retail pricing, target gross margin and wholesale terms before selecting fabric weight or embellishment.

Build Production-Ready Specifications

1 complete tech pack should define measurements, graded size chart, construction, Pantone colors, GSM, artwork placement, label copy and packaging. Include front, back and detail views to reduce quote revisions. 2 sample rounds are common: first for pattern, fabric and decoration decisions; second for final corrections. Approve a full size set when extended sizes or oversized proportions are central to the offer.

Control Orders And Replenishment

100 units per style and color can support a capsule test with Junsheen, while repeat programs can scale after sell-through data proves demand. Confirm approved sample, final quantities, delivery window and payment milestones before bulk cutting. 3 checkpoints—pre-production, in-line and final packed-goods inspection—should cover measurements, stitching, decoration and carton counts. Book freight early, prepare product photography and launch assets, then reorder core winners before inventory reaches 30 days of projected sales.